Lead selenide ( PbSe), or lead(II) selenide, a selenide of lead, is a semiconductor material. It forms of the sodium chloride structure; it has a direct bandgap of 0.27 eV at room temperature. (Note that
It may be formed by direct reaction between its constituent elements, lead and selenium.
Infrared detection
PbSe was one of the first materials found to be sensitive to the
infrared radiation used for military applications. Early research works on the material as infrared detector were carried out during the 1930s and the first useful devices were processed by Germans, Americans and British during and just after World War II. Since then, PbSe has been commonly used as an infrared
photodetector in multiple applications, from
spectrometers for gas and
flame detection to infrared
for artillery ammunition or Passive Infrared Cueing systems (PICs).
As a sensitive material to the infrared radiation, PbSe has unique and outstanding characteristics: it can detect IR radiation of wavelengths from 1.5 to 5.2 μm (mid-wave infrared window, abbreviated MWIR – in some special conditions it is possible to extend its response beyond 6 μm), it has a high detectivity at room temperature (uncooled performance), and due to its quantum nature, it also presents a very fast response, which makes this material an excellent candidate as detector of low cost high speed infrared imagers.
Theory of operation
Lead selenide is a
photoconductor material. Its detection mechanism is based on a change of conductivity of a polycrystalline thin-film of the active material when
photons are incident. These photons are absorbed inside the PbSe micro-crystals causing then the promotion of
electrons from the
valence band to the
conduction band. Even though it has been extensively studied, the mechanisms responsible of its high detectivity at room temperature are not well understood. What is widely accepted is that the material and the polycrystalline nature of the active thin film play a key role in both the reduction of the
Auger effect and the reduction of the dark current associated with the presence of multiple intergrain depletion regions and potential barriers inside the polycrystalline thin films.
Thermoelectric properties
Lead selenide is a thermoelectric material. The material was identified as a potential high temperature thermoelectric with sodium or chlorine doping by Alekseva and co-workers at the A.F. Ioffe Institute in Russia. Subsequent theoretical work at Oak Ridge National Laboratory, USA predicted that its p-type performance could equal or exceed that of the sister compound,
lead telluride.
Several groups have since reported thermoelectric figures of merit exceeding unity, which is the characteristic of a high performance thermoelectric.
Manufacture of PbSe infrared detectors
Two methods are commonly used to manufacture infrared detectors based on PbSe.
Chemical bath deposition (CBD)
Chemical bath disposition (CBD) is the standard manufacturing method.
It was developed in USA during the '60s and is based on the precipitation of the active material on a substrate rinsed in a controlled bath with
selenourea,
lead acetate,
potassium iodine and other compounds. CBD method has been extensively used during last decades and is still used for processing PbSe infrared detectors. Because of technological limitations associated to this method of processing, nowadays the biggest CBD PbSe detector format commercialized is a linear array of 1x256 elements.
Vapour phase deposition (VPD)
This processing method is based on the deposition of the active material by thermal evaporation, followed by thermal treatments. This method has an intrinsic advantage compared with the CBD method, which is the compatibility with preprocessed substrates, like silicon CMOS-technology wafers, and the possibility of processing complex detectors, such as the focal plane arrays for imagers. In fact, this has been the most important milestone in the last decades concerning the manufacturing of PbSe detectors, as it has opened the technology to the market of uncooled MWIR high-resolution imaging cameras with high frame rates and reduced costs.
PbSe Quantum dots based photodetectors
Trioctylphosphine selenide and lead acetate react to produce nanophase lead selenide.
Lead selenide nanocrystals embedded into various materials can be used as ,
See also
External links
